Some of the links in this post are affiliate links, which means I may earn a small commission if you choose to make a purchase at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases. Read my full Ethics & Affiliate Relationship Disclaimer.
Most USB-C wall chargers put the ports on the front. This Anker 140 watt charger does not. It puts all four ports on the bottom, and that one decision changes how the whole thing looks and sits on a wall. It also has something I have never seen on a wall charger before: a small screen on the front that shows live charging stats. Anker sent me this charger for free to make this video, and after living with it I want to walk through everything it does, every number that matters, and who I think should buy it versus who should look at something else.
A compact, sleek 140 watt charger with a genuinely useful screen and no power drop when every port is in use. The price is high, but you get a lot for it.
- Full 140 watts stays available even with all four ports in use
- Live front screen shows wattage, temperature, and remaining headroom
- Ports mounted on the bottom for a clean, compact wall footprint
- Comes with a 240 watt braided cable and an 18 month warranty
- At $90 you are paying a premium over plain chargers with similar wattage
- Only one of the four ports is USB-A
- Overkill if you only ever charge a phone or a single device
- Intro: Who This Is For
- Ports on the Bottom, Not the Front
- Two Colors and a Screen You Do Not See Elsewhere
- How the Power Splits Across Four Ports
- What Comes in the Box and the Warranty
- What the Screen Actually Shows You
- The Price and Who Should Buy It
- This Charger or the Anker Prime Fusion Power Bank
Intro: Who This Is For
This is a charger for someone who runs a lot of hardware. If you carry a laptop plus a tablet plus a phone, or you want one wall brick that can fast charge a MacBook Pro and still have power left over for two more devices, this is aimed right at you. The 140 watts of total power and the four ports are the whole point. If you only ever plug in a single phone overnight, this is more charger than you need, and I will point you toward a better fit later in the review. For everyone who is tired of carrying three separate bricks, keep reading.
Ports on the Bottom, Not the Front
The design is the first thing that stands out. The fold-down prongs sit on the back, and all four ports run along the bottom of the unit. That layout is why the charger stays so compact and why it looks so clean on the wall. Your cables drop straight down instead of sticking out toward you, so it does not crowd whatever is plugged in next to it.
You get four ports total: three USB-C and one USB-A. All 140 watts of power are shared across those ports. The single USB-A is the one small compromise here. Most of what I charge is USB-C now, so three of those plus one legacy port is a reasonable split, but if you have several older USB-A devices you will feel that limit.
Two Colors and a Screen You Do Not See Elsewhere
The charger comes in silver or a space grey color, and both look sleek and minimal. The real talking point is the display on the front. I have never seen a wall charger with a screen like this. It shows the current charging stats at a glance: how much power is going out, the temperature of the charger, and how much wiggle room you still have on the total wattage. It is the kind of thing that sounds like a gimmick until you use it and realize you actually check it.
How the Power Splits Across Four Ports
Here is the part worth understanding before you buy. You get 140 watts total, and how much any one device pulls depends on which ports you use.
- One port: use a single port and you get the full 140 watts to that device.
- First two ports: spread across the first two ports and each one gets 70 watts.
- Port two and port three: this is the combo I recommend for a laptop plus another device. Port two gives 100 watts and port three reserves 40 watts.
The important detail is what happens when you fill every port. On a lot of chargers, using all the ports drops your total wattage. That does not happen here. You still get the full 140 watts even with every port occupied. That is the reason this holds up as a multi-device charger and not just a spec sheet number.
What Comes in the Box and the Warranty
In the box you get the charger and a braided cable. That cable is not an afterthought. It supports power all the way up to 240 watts, so it is future proof well beyond what this charger itself can output. The braided jacket feels nice and the cable is very flexible, which matters when you are routing it behind a desk or coiling it into a bag.
The charger also ships with an 18 month warranty. If anything goes wrong, Anker has a solid reputation for standing behind its gear, and 18 months is longer than a lot of the competition offers.
What the Screen Actually Shows You
The screen shuts off after about a minute to save itself. Before it does, there is a little animated character on it that reminds me of Miss Minutes from Loki. It is a small touch and it made me smile.
Once you plug a device in, the display wakes up and shows the current power going out, broken down by port. With just one port in use, I could see my iPad charging. Because the iPad was mostly full, it was pulling a lower wattage, and the screen still showed the full 140 watts available. Press the button on the front and it switches to the temperature reading. That temperature view is genuinely useful, because the charger monitors itself and protects against any temperature spikes instead of leaving you guessing. There is also a standard screen that just shows the total wattage going out. When I added my iPhone alongside the iPad, the display split out the power going to each one at the same time. You can leave whichever view you prefer up on the screen.
The Price and Who Should Buy It
The Anker 140 watt charger goes for $90. That is a real premium, and you should be clear on what that money buys: the screen, the compact size, the high quality 240 watt cable in the box, and Anker’s reputation behind it. If you strip those away, you can find plain chargers at similar wattage for less.
I think this is for the person who wants one charger for a laptop, a tablet, and a phone all at once. You have so much wattage and so many ports that you can keep everything topped up from a single wall outlet. I also just like how sleek it looks on the wall with all the ports pointing down. That is not something you usually find in a wall charger.
This Charger or the Anker Prime Fusion Power Bank
The question I would ask yourself is whether you want this 140 watt charger or the Anker Prime Fusion power bank, which doubles as a charger. The Fusion tops out at 65 watts, so it is not going to keep up as a multi-device charger the way this one does. What the Fusion gives you is one thing to carry that also holds a battery, which makes it a great travel pick. This 140 watt charger is the pick when you need plenty of power to fast charge several devices at once, or when you want to keep a laptop like a MacBook Pro charged on the go.
| Anker 140W Charger | Prime Fusion Power Bank | |
|---|---|---|
| Max power | 140W | 65W |
| Type | Wall charger | Power bank plus charger |
| Built-in battery | No | Yes |
| Best for | Multi-device and laptop charging | One-item travel carry |
The Verdict
I highly recommend the Anker 140 watt charger for anyone who wants a lot of power to keep several different devices charged, all from a small, sleek, lightweight brick. The full 140 watts stays available even with every port in use, the screen is more useful than I expected, and the included 240 watt cable and 18 month warranty round it out well. The $90 price is the only real hesitation, and it is a fair one. If you charge a single device, save your money. If you run a laptop and a stack of gear and you want one charger to handle all of it, this is an easy call.
